Pumps & Pumping Equipment
Every pump for every occasion, from irrigation pumps to slurry handling pumps.
Irrigation UK are Proud supplier of
ESPA Pumps, Calpeda Pumps, Foras Pumps.
Types of Pumps available
Inline Jet Pumps, Verticle Multistage pumps, Sub pumps, Well Pumps, Borehole Pumps, Swimming pool and Pond Pumps Swimming pool Heat Pumps Vacuum MEC Pumps PTO Pumps Pump and Pressure Sets Commercial Industrial Pumping Systems
If you have any questions, or need to spec up the correct pump for your application, we can help.
Please contact one of our Technical Sales team.
We Welcome you questions
Anti Vibration Pump Bellows BSP Female Threaded Galvanised – Expansion Joint Material: NBR Max. temp.: 110 °C
Anti Vibration Pump Bellows DN Flanged Galvanised – Expansion Joint Material: NBR Flange material: steel Max. temp.: 100 °C
Caste Iron Submersible pump Model: SPK450 5500-LPH Connection: male thread Pump body: cast iron Material Impeller: fibre reinforced plastic Colour: black Type: SPK 450 Power: 0.45 kW Voltage: 230V Press: 1 ” Float: not included
Condor Adjustable Pressure Switch – 1/2″ 25Amp 230/400V Please click link below for Technical Manual. 0920090M-ENG Also Available Foras: JA150-300 Cast Iron Inline Jet Pump -Self Priming – Single Phase Hydro S Horizontal Membrane Pressure Tanks 10Bar
Condor: Pressure Switch – With Thermal Overlaod Relay. 230/400V 1/2″ See Link below for complete Technical Specifications. IP55 Protection Pressure Switch Tech Info 0920058M – ENG Also Available Foras: JA150-300 Cast Iron Inline Jet Pump -Self Priming – Single Phase
Model: Acuaria17 Submersible multi-stage pump for open wells with a minimum diameter of 140 mm. Double mechanical seal in oil bath. Applications: Irrigation and hydropneumatic sets. Max. immersion level according to technical table, code 2240. Materials: Outer casing, motor casing, impellers and filter in stainless steel AISI 304. Motor shaft and pump shaft in stainless […]
Model: ASPRI35 N Quiet running multi-stage centrifugal pumps. Applications: To work with clean water in domestic and industrial applications, irrigation and hydropneumatic sets. Self priming up to 9mtrs. Materials: Pump body and impellers in stainless steel AISI 304. Motor shaft in stainless steel AISI 420. Diffusers in tecnopolimer. Suction and discharge mountings in cast iron. […]
Model: DELTA Self-priming centrifugal pumps with Venturi system up to 9 m. Applications: To work with clean water. Irrigation and hydropneumatic sets. Materials: Pump body in stainless steel AISI 304. Motor shaft in stainless steel AISI 420. Impeller in glass loaded Noryl®, Delta 505, 755, 1005. Impeller in stainless steel AISI 304, Delta 1755. Diffusers […]
Model: Drainex 100 Submersible pumps, Vortex system. Applications Drainage of sewage and dirty water, operation in septic tanks and small purifying intallations. Materials Discharge body and upper mounting in cast iron. Impeller in brass with free passage of particles in suspension of Ø 34mm. Double mechanical seal in ceramic/ graphite and ceramic/silicon carbide. Motor housing […]
Model: Drainex 300/301/302 Submersible monobloc pumps, Vortex system. Applications Drainage of sewage and dirty water, operation in septic tanks and small purifying installations. Materials Pump body, discharge body, suction body and impeller in cast iron. Mechanical seal in silicon carbide and ceramic. Pump base in AISI 304 stainless steel, detachable for coupling of accessories. O-rings […]
Model: Sub Tank 270/05 Single pump booster/tank package consisting of a 270Ltr break tank with a submersible pump and external control device. To restore system pressure when the mains supply is insufficient, a pump may be used. However to comply with Water Authority Bye-laws a break tank must be incorporated, as the pump is precluded […]
Model: Tecnoself 15 Horizontal multistage pumps with integral pressure device Applications: To supply water at pressure in domestic applications. With protection to prevent the pump from operation when dry. Materials: Pump body and impellers in stainless steel AISI-304. Motor shaft in stainless steel AISI-420. Diffusers in tecnopolimer. Mechanical seal in graphite and steatite. Motor housing […]
Foras: Domestic Pump and Pressure Booster Set 60ltr – 100ltr Improve mains water pressure. Mains water pressure Booster Set is designed to boost the pressure of the water supply and deliver the correct amount of water to all oultlets. The pressure switch enables it to automatically start and stop the pump while the pressure vessel […]
Foras: Domestic Pump and Pressure Booster Set 24ltr – Improve mains pressure. Pressure Tank set are designed to boost the pressure of the water supply and deliver the correct amount of water to all oultlets. The pressure switch enables it to automatically start and stop the pump while the pressure vessel allows for smaller volumes […]
Jet Pump : JA150-300 Cast Iron Inline Self Priming Single Phase MODELS : JA150-300-M DESCRIPTION Jet Pump Self-priming centrifugal pump suitable for water supplies (even if mixed with gas). Suitable for small and medium household and civil systems, when connected to autoclave tanks, an automatic pressurisation system. FEATURES Body Pump cast iron Impeller […]
MODEL: JA/JR DESCRIPTION self-priming centrifugal pump suitable for water supplies (even if mixed with gas) in small household systems, connected to autoclave tanks, for transferring liquids and emptying tanks; also used for gardening. FEATURES Body Pump cast iron Impeller Noryl or Brass Temperature of the liquid 0-50 ° C ENGINE typology 3 […]
Foras: KB Centrifugal Pump Two impeller centrifugal pumps for constructing pressurisation systems for civil and industrial plant; the two counter-posed impellers guarantee high head with good delivery. FEATURES Pump body cast iron Impeller brass or Noryl Temperature of the liquid Noryl® impeller 0 – 50 °C brass impeller 0 – 90 °C MOTOR Type 3~ […]
Foras: KM Non-Priming Centrifugal Pump Single impeller centrifugal pumps, extremely silent suitable for household, civil and industrial applications, with a very flat curve to guarantee constant pressure even when the delivery. FEATURES Pump body cast iron Impeller Noryl or brass Temperature of the liquid Noryl® impeller or aluminium bracket 0 – 50 °C brass […]
Foras: MN Centrifugal Pump The pumps are supplied complete with counter flanges with female thread. Mechanical seal. Maximum water temperature 90°C. Monobloc horizontal centrifugal pumps, constructed to EN 733 standards; widely used in water supplies, pressurisation and fire-fighting systems, cooling, heating, irrigation, industrial and agricultural applications; standard supply with counter-flange FEATURES Pump body cast iron […]
Foras: Priming Diesel Pump – 0.74kw Pump will be delivered with cable and DIN plug. UK / DIN plug included for UK deliveries. Liquid ring positive displacement pump with star impeller that gives considerable suction power to the pump. Particularly suitable for liquid transfer (including volatile liquids). The MD model has a frontal brass […]